Commercial Service
Commercial
Abrasive Sand & Soda blasting
Overview of the service
Abrasive blasting to remove old paint, coatings and rust from steel, concrete, and plant.
BlastOff Solutions uses multiple techniques including vacuum blasting, wet blasting, slurry blasting, dustless blasting, and dry blasting to suit different site and surface requirements. Our work supports effective surface preparation for coatings, fire protection systems, repairs, and refurbishment.
We operate across live commercial and industrial sites, following project specifications and site requirements.
01
Sandblasting
02
Soda blasting
03
Vapour blasting
04
Dustless blasting
05
Vacuum blasting
06
Wet and dry blasting
Capabilities and equipment
We use professional blasting systems suited to a range of site conditions.
Wet abrasive blasting for reduced-dust environments and vacuum blasting for no dust or messy sand on surrounding surfaces.
01
Abrasive sandblasting to Sa 2.5 and Sa 3 per AS 1627.4 for paint removal, rust remediation, and surface profiling on structural steel, concrete, and masonry
02
Soda blasting on fire-damaged timber — removes char, soot, and smoke residue without aggressive cutting, preserving the underlying timber substrate
03
Soda blasting for paint and coating removal on aluminium, fibreglass, wood, and soft substrates where abrasive sand would cause surface damage
04
Wet abrasive blasting combining water and abrasive for near-dustless operation on sensitive sites, around the public, or where airborne containment is restricted
05
Dry soda blasting for grease, oil, and contaminant removal prior to coating — soda neutralises surface acidity and leaves no abrasive residue
How we prepare commercial
sand and soda blasting
Our process focuses on safe, effective surface preparation.
Project details help confirm the most suitable approach.
Surfaces are assessed to
determine the appropriate
blasting method
determine the appropriate
blasting method
Abrasive blasting is
carried out to the
required standard
carried out to the
required standard
Dust control
methods are used
where required
methods are used
where required
Surfaces are checked
to confirm readiness
for the next stage
to confirm readiness
for the next stage
Where this
service is used
Commercial sandblasting is commonly used for:
01
Structural steel and frames
02
Concrete floors and walls
03
Industrial facilities and plant and equipment areas
04
Refurbishment and remediation projects
Ready to discuss
your project?
If your project requires commercial sandblasting, get in touch with BlastOff Solutions. We can review your requirements and advise on the right preparation method.